Out of stock
AED230.00
Overview
- Fully automatic blood pressure and pulse measurement on the wrist
- Arrhythmia detection function
- Average of all saved measured values and morning and evening blood pressure for the last 7 days
- Automatic switch-off function
- 2x50 memory spaces
- Fully automatic blood pressure and pulse measurement on the wrist
- Arrhythmia detection function
- Average of all saved measured values and morning and evening blood pressure for the last 7 days
- Automatic switch-off function
- 2x50 memory spaces
- The wrist blood pressure monitor is used for non-invasive measurement and monitoring of adults' arterial blood pressure. It is reliable with easy to use. It has two channels, each with 50 memories. It shows time, date, error warning and battery charge indication. Also has two year of warranty. Battery is powered with 2x1.5V alkaline batteries AAA
- This instrument can identify possible heart rhythm disturbance during measurement and if necessary indicates the measurement.
- Use it to measure your blood pressure quickly and easily
- Storing the results and displaying the progression of readings together with the average.
- Suitable for wrist circumference from 13.5 22cm
- Dimensions of 80x70x27mm with weight of 140g
- Positioning cuff
- Bare your left wrist, making sure that the circulation in the arm is not restricted by any clothes etc. that are too tight. Position the cuff on the inside of your wrist
- Fasten the cuff with the Velcro fastening so that the upper edge of the monitor is positioned approx. 1 cm below the ball of your thumb
- The cuff has to be fitted tightly around the wrist but should not constrict itMeasuring blood pressure
- Put on the cuff as described previously and assume the position in which you want to carry out the measurement
- Press the User-Switching key to select a memory zone, and press the key 2x to start measurement in the chosen memory zone. After checking the display with all digits lighting up, the monitor will automatically inflate. Following the self-test, during which all display elements briefly appear, the measurement begins. During inflation the device already determines measured values used to estimate the required inflation pressure. If this pressure is insufficient, the device automatically inflates by another 40 mmHg
- Then the pressure in the cuff is slowly released and the pulse is measured
- When the measurement has been completed, the remaining air pressure is released very quickly. The pulse, the systolic and the diastolic blood pressure are displayed
- The device requires approx. 5 seconds to store the determined measured value
- You can interrupt measurement at any time by pressing the ON/OFF button
- To switch off and release the pressure, press the ON/OFF button again. If you forget to switch off the device, it switches off automatically after approx. 1 minute
- Wait at least 5 minutes before taking another measurement. For detailed instruction, kindly read the manual carefully before use
| Width | 10 |
|---|---|
| Height | 9.2 |
| Length | 13 |
| Brand | Beurer |
| Gender | Unisex |
| Life Stage | Adult |
| Pack Specification | Box |
| Manufacturer | Beurer |
Write Your Own Review